TaylorMade Golf Systm2 Putter Del Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This taylormade golf systm2 putter del review focuses on the Del Monte 12 model, a wide body blade designed for stability. It features an L-Neck hosel that provides toe hang for players seeking rotation in their stroke. The head is crafted from soft 304 stainless steel with a two-tone satin silver and black PVD finish. Its 35-inch shaft length suits many standard setups. The precision milled face uses fly-cutting and saw-cutting to optimize feel and roll consistency. This combination of specs targets golfers who want forgiveness without sacrificing traditional blade aesthetics.
What stands out
- Wide body blade design with an extended back for a deeper CG location
- L-Neck hosel providing toe hang for stroke rotation
- Higher MOI characteristics for enhanced stability on off-center hits
- Precision milled face with optimized score line depth
- 304 stainless steel construction with scratch silver and black PVD finish
Who it fits
Good fit for
You should consider this putter if you prefer a blade shape but want the forgiveness typically found in mallets. The wide body and higher MOI help stabilize your stroke on mishits. The L-Neck hosel suits players who need the face to rotate open and closed during the stroke. The 35-inch length is a common standard, fitting many players well. If you value a traditional look with modern stability tech, this spec set aligns with your needs.
Who should skip it
Look elsewhere if you require a face-balanced putter. The L-Neck hosel creates toe hang, which is the opposite of face balance. You might also skip this if you prefer a narrower blade profile, as the Del Monte is a wide body design. Players seeking a mallet shape with heavy weighting should check the Ardmore or Bandon options in the SYSTM2 line. The specific hosel and head shape limit its versatility for certain stroke types.
Verdict: The Del Monte 12 blends traditional blade aesthetics with modern stability specs. It is a strong choice for rotation-based putters who want forgiveness in a classic shape.
Key specs explained for this putter
Neck Type: L-Neck
The L-Neck hosel creates toe hang, which encourages the clubface to rotate open and closed during your stroke. This design suits players with an arcing putting motion rather than a straight-back-straight-through path. If you feel the face stays open too long, this hosel helps square it up. Compare this to face-balanced options if your stroke is minimal.
Head Style: Wide Body Blade
This wide body blade shape offers a larger profile than traditional thin blades. The extended back moves the center of gravity deeper and further back. This positioning increases stability through impact and reduces twisting on off-center hits. You get more forgiveness without the bulk of a full mallet. It bridges the gap between classic looks and modern stability.
Face Technology: Precision Milled Face
The face is fly-cut and saw-cutter milled to specific depths. This process creates consistent grooves that optimize feel and promote a smooth, true roll. You get reliable feedback on every strike, regardless of where the ball contacts the face. This technology ensures the ball starts on your intended line with minimal skid. It is a key feature for distance control.
Shaft Length: 35 Inches
A 35-inch shaft length is a standard fit for most average-height golfers. It allows you to stand comfortably with your arms hanging naturally. This length helps maintain proper posture and eye position over the ball. If you are taller, you might need a longer shaft. If you bend over more, a shorter one may suit you better. Check your stance for comfort.
MOI Characteristics: Higher MOI
Higher Moment of Inertia means the clubhead resists twisting when you miss the center of the face. This stability keeps the clubface square on mishits, preserving your distance and direction. You will notice less loss of speed on toe or heel strikes. This characteristic is vital for consistency. It helps maintain performance even when your stroke is slightly imperfect.
Design and build details
The head is constructed from soft 304 stainless steel. According to the listing, the finish features a premium two-tone satin scratch silver front with a black PVD back. Every connection point is milled and fastened by two visible screws on the face. This construction method ensures precise alignment between components. The entire face is fly-cut and saw-cutter milled. The score lines are set at a specific depth to optimize feel and promote a consistent roll across the striking surface.
This Del Monte 12 model is a wide body blade with a 35-inch shaft. The head measures five inches in width and five inches in height. The overall listed length is 48 inches, while the shaft itself is 35 inches long. The club weighs 1.2 pounds. The wide body design provides an extended back, which places the center of gravity deeper. This geometry delivers a higher moment of inertia for enhanced stability and forgiveness on off-center hits.
The L-Neck hosel creates toe hang, encouraging rotation for players with an arcing stroke. The listing notes this is paired with a standard grip. The available shaft material is KBS stepped chrome. These specifications combine to create a putter that prioritizes stability and traditional feel. The design choices support golfers who want a wide blade profile with rotational characteristics.
Setup and everyday use
Setup begins with selecting the correct configuration for your stroke. This specific listing provides a 35-inch shaft length, which is a common standard for many golfers. The head is a wide body blade, offering a larger profile than traditional thin blades. This design choice directly impacts your setup by increasing the moment of inertia, making the club more stable against twisting on off-center hits.
The L-Neck hosel is a critical setup detail. It creates toe hang, meaning the clubhead will rotate naturally during your swing. You should align your hands and feet to match an arcing stroke path. If your stroke is straight-back-straight-through, this hosel might feel heavy or difficult to square at impact.
Everyday use involves managing the visual contrast of the two-tone finish. The satin scratch silver front and black PVD back help define the face angle clearly at address. The precision milled face with specific score lines is intended to provide consistent roll. You will notice the soft 304 stainless steel construction, which generally offers a softer feel at impact compared to harder metals.
The 35-inch length requires you to check your posture. Ensure your eyes are directly over the ball or slightly inside. The wide body blade allows for a comfortable stance without excessive crouching. The standard grip fits most hand sizes, providing a secure hold. You should verify that the 35-inch length feels balanced in your hands before playing. This setup ensures the club works with your natural mechanics rather than against them.
Check these specs first
Before purchasing this TaylorMade Systm2 Del Monte 12, verify the shaft length matches your posture. This listing specifies a 35-inch shaft, which suits many players, but you may need a different length for optimal comfort. Check that the L-Neck hosel aligns with your stroke arc. If you prefer a face-balanced putter for a straight-back-straight-through motion, this toe-hang design might not fit your needs. The wide body blade offers high MOI for stability, but ensure you are comfortable with its visual profile at address. Clean the milled face regularly to maintain consistent roll. Avoid abrasive cleaners that could damage the satin scratch silver finish. This model sits alongside other blade and mallet options in the Systm2 line. Consider whether the Del Monte’s deeper center of gravity suits your game better than the narrower Soto or Juno blades. Confirm the right-handed orientation matches your setup. Proper grip selection also matters for feel and control.
Check before you buy
- Verify the 35-inch shaft length suits your posture
- Confirm L-Neck toe hang matches your stroke arc
- Ensure right-handed orientation fits your setup
- Compare wide body blade stability against narrower options
- Plan regular cleaning to protect the milled face
The product at a glance
TaylorMade Systm2 Del Monte 12 35" Putter
Best for: players wanting rotation and stability
- Hand Orientation
- Right Handed
- Shaft Length
- 35"
- Head Style
- Wide Body Blade
- Neck Type
- L-Neck
- Face Technology
- Precision Milled Face
- MOI Characteristics
- Higher MOI
View on Amazon: TaylorMade Systm2 Del Monte 12 35" Putter Affiliate link
The TaylorMade Systm2 Del Monte is a right-handed wide body blade putter with a 35-inch shaft. It features a precision milled face and higher MOI for enhanced stability. The L-Neck hosel provides toe hang for rotation. Its extended back deepens the center of gravity. This design suits players seeking forgiveness and a classic blade aesthetic with modern engineering.
Pros
- Wide body blade design for higher MOI
- Precision milled face for consistent roll
- L-Neck hosel offers toe hang rotation
- Extended back deepens center of gravity
Cons
- Limited to right-handed orientation in this listing
- Standard grip only available in this configuration
- Blade shape offers less forgiveness than mallets
Good fit if
- You prefer a wide body blade shape
- You want toe hang for stroke rotation
- You seek higher MOI stability in a blade
Skip if
- You require a left-handed option
- You prefer a face-balanced mallet design
- You need a custom grip upgrade
Verdict: TaylorMade Systm2 Del Monte 35" Putter delivers stability through its wide blade and high MOI. It fits golfers who want rotation and forgiveness in a traditional look.
Specifications side by side
| Spec | TaylorMade Systm2 Del Monte 12 35" Putter |
|---|---|
| Hand Orientation | Right Handed |
| Shaft Length | 35" |
| Head Style | Wide Body Blade |
| Neck Type | L-Neck |
| Face Technology | Precision Milled Face |
| MOI Characteristics | Higher MOI |
| Size | Regular Size |
| Age Range | Ages 3-5 |
| Length | 35 Inches |
| Dimensions | 48 × 5 × 5 inches |
| Weight | 1.2 pounds |
| Color | Silver/Black |
| Model | N7558127 |
Frequently asked questions
Who is the TaylorMade Systm2 Del Monte best suited for?
This putter is designed for players who want rotation and stability in their stroke. The wide blade head provides a high moment of inertia for forgiveness on off-center hits. The L-Neck hosel creates toe hang, which helps the clubface rotate naturally. This setup benefits golfers with an arcing putting motion rather than a straight-back-straight-through path.
What is the shaft length of this specific model?
The listing specifies a 35-inch shaft length. This is a common standard length that suits many average-height golfers. You should verify that this length matches your posture and putting setup. If your stance requires a longer or shorter club, you may need to look for a different configuration to ensure proper comfort and alignment.
Does this putter have toe hang?
Yes, the L-Neck hosel design creates significant toe hang. This feature encourages the clubface to rotate open and closed during your backswing and follow-through. It is ideal for golfers who use an arcing stroke. If you prefer a face-balanced putter for a straight-back-straight-through motion, this model might not be the right fit for your game.
What materials are used in the construction of the head?
The head is crafted from soft 304 stainless steel. This material choice provides a soft feel at impact, which can improve feedback on your putts. The construction includes visible screws that fasten the connection points. These screws are milled for precision, ensuring a solid connection between the head components and contributing to the overall stability of the club.
What are the dimensions of the putter head?
The head measures 5 inches in width and 5 inches in height. This wide body blade profile offers a larger visual profile compared to traditional thin blades. The increased size helps with alignment and provides a higher moment of inertia. This design choice directly enhances stability and forgiveness, making it easier to maintain direction on mishits.
Is this putter right-handed or left-handed?
The product listing specifies that this model is for right-handed players. The grip orientation and hosel design are configured for a right-handed stroke. If you are a left-handed golfer, you will need to find a version specifically designed for left-hand use. Always check the hand orientation details before purchasing to ensure the club matches your playing style.